Strong thrust, high structural strength Heavy Auto Programmed Adobe
Cutting Machine
1 Product features
It is specially desighed for bigger main machine, type 50, 55, 60,
70 and above, high capacity and fully hard mould production line.
With strong pushing power and high strength structure, it is
suitalbe for making standard, multihole and large block bricks with
shale and coal gangue.
Cutting frequency ≤ 20 times / min, cutting height up to 260mm,
cutting mud length: 1750-2500mm
This set of billet cutting machine is especially suitable for
50,55,60,70 and above large mainframe, large capacity full hard die
production lines. Large thrust, high structural strength, suitable
for shale, coal gangue and other production standards, porous,
large brick. Cutting Frequency ≤20 times per minute, cutting height
260 mm, cutting mud length 1750-2500 mm, especially suitable for
60,70 and above large-scale brick-making machine, high output full
hard die production line. Large thrust, high structural strength,
suitable for shale, coal gangue, clay and other production
standards, porous, large brick. Cutting Frequency ≤18 / Min,
cutting height 260mm, cutting mud length 1750-2500mm.
2 Technical parameters
| Date | Units of meas | 双联切条切坯机 |
| Power | kw | 14 |
| Cutting frequency | times/min | 10-20 |
| Production capacity | pieces/h | 20000-55000 |
| Overall dimension | mm | 10000×3100×1600 |
3 Product description
It is achieved by brick cutter.
The clay column which sends by brick cutter will arrived the clay
column locating guard plate through the table-board roller,after
the optoelectronic switch detect the clay column, through the
control program to make the separation cylinder start, and pull-out
the separate leader, and connect the combined arm, the power of
electromotor is reduced by reducer and spindle box.
The crank rocker will bring the pusher to make reciprocal
rectilinear motion, while the pusher move forward, the clay column
will be pushed to the steel wire to achieve the brick cutting,
while the pusher move back, the separate-leader will bring back to
home position by return-tension, and then to separate the combined
arm, cut-off the power(rotate speed).
The pusher through the proper braking and return to position nearby
the end-stop point(the position for next cutting ) through the
inheritance, and then waiting for next cutting.
Automatic brick strip cutting machine can adjust the length of
bolar strips at will to have no earth-crumbs (the earth-crumbs
length of thin-walled hollow-brick), according to different
standards of adobes. It can cut bolar strips automatically and
vertically, and carry them onto the cutting platform to make
unmanned operation and remote control.
A, The vertical strip cutting machine can overcome the mud
dump,increase production save 7-15% energy ,reduce one or two
staffs and decrease working wear.
B, The automatic strip cutting and blank cutting system is matched
with automatic production line could realize unmanned operation.
4 Advantages
large grade and firm structure, with full thrust, with the features
of forming two large blocks for one time, with materials of shale,
coal gangue, fly ash, hard and soft stripes of the clay.
Our production equipments, highly efficient energy-saving, compact
structure, automation, simple maintenance, stable and reliable,
low-cost advantages, which can satisfy the different needs of the
large, medium and small-scale brick-making manufacturers; are clay,
shale, coal gangue, fly ash and other raw materials ideal
brick-making equipment At the same time, our factory can also
provide users.
Brick making machine, column segment cutter is used for cutting the
adobe strip from extruder according to the length requirement of
adobe piece cutting machine to adobe section, and feed them into
piece cutting machine.
This machine is used for cutting brick strips into brick billets by
steel wires, usually it works together with auto brick stacking
machin. It is made of rollers, dam-board, push plate and steel
wires frame etc, suitable for the product line of hard plasticity
and semi hard plasticity, in order to realize automatic and
semi-automatic operation of starndard brick, hollow brick and
perforated brick which use shale, coal gangue, coal ash, clay and
mud as raw materials
Feature
1. Different products: vertical section cutter, synchronous cutter.
2. This machine may adjust the cutting strip length and cut the adobe strip automatically.
3. The vertical cutter has the features like vertical cutting, small stub, and high efficiency.
Specifications
1. Labour saving
2. Low fault rate
3. One years' warranty
4. More durable
5. High efficiency
5 Product Picture
